Mat & Glass Cutting Machines

Part # 493
No. 11 Blade - Designed with an extremely fine, sharp point for fine angle cutting, stripping, trimming, potting compounds, excess flashing, correcting printed circuits, cleaning excess solder, gasket cutting and de-burring.

Part # 496
No. 24 Blade - Designed with an extremely fine, sharp point for fine angle cutting, stripping, trimming, potting compounds, excess flashing, correcting printed circuits, cleaning excess solder, gasket cutting and de-burring.

Part # 497
Retractable Blade Scraper Uses single-edge razor blades. Push-pull action exposes blade for scraping, retracts it when not in use. Fits in pocket. Comes complete with 1 blade.

Part # 488
Replacement Blades United's Own blades! Packs of 5. United version of the dexter #3. Replacement Blade bulk pak.

Part # 502
Dexter Blades For the Dexter Mat Cutter. Packs of 5. Or bulk pak of 100. #054170-P for paks. #54160 for bulk of 100.

Part # 492
Decor Brand - X-Acto Style Knives No. 1. For carving, cutting, etching, hollowing, piercing, sawing, scoring, scraping, scribing, slicing, stripping and trimming.

Part # 914
Zippy Cutter A combination of scissors and knife - cuts all sorts of paper, textiles, thin cardboard, string, etc. Cuts straight or curved lines. Safe, speedy, strong practical.

Part # 495
X-Acto Knives For carving, cutting, etching, hollowing, piercing, sawing, scoring, scraping, scribing, slicing, stripping and trimming.

Part # 498

• Heavy Duty/Bright Aluminum Finish
• Aluminum die-cast in two sections provides blade storage. Has handy hang hole.
• Furnished with blades.
• Uses No. 486 or No. 487 blade

Part # 499
Retractable Blade Handle Locks in 3 positions.
Holds 3 blades in handle.
Uses No. 486 or No. 487 blade.

Part # 480
Single edge razor blades. First quality. (No. 9) Packs of 100

Part # 481
Heavy duty single edge razor blades. First quality. (No. 12) packs of 100.

Part # 482
Heavy duty razor blade. (No. 12) No notches as supplied with the Pre 1980 C&H cutters.

Part # F05001

Mat Blade for Fletcher model #3000 multi-material cutter

Part # F05711
All 8400 series cutters use the #3531M.
Do not use the 4232 in these machines.

Part # 483
United mat cutter blades.
.012 gauge for regular mat board. For bevel cuts.

Part # 484
.015 gauge for rag board. Mat cutter blades

Part # 485
United single bevel blades .015 bevel

Part # 486
Utility blades boxed per 100
.017 Thickness

Part # 490
Kleen-Cut 1 1/2" x.012 Blades 100 Pack. Compatible with Logan Matboard Cutters

Part # 491
Kleen-Cut 1 1/2" x.015 Blades 100 Pack. Compatible with Logan Matboard Cutters

Part # 1584
Six-way glass turret with six wheels for use with the Logan F700-1 Wall Mount Multi-Material Cutter. Each wheel is numbered from 1 to 6 to allow the user to rotate through each wheel as they wear to move through all 6 before needing to replace the turret. Logan F57 replacement glass turrets are sold individually.

Part # 487
Same style & gauge as Stanley
.025 Thickness

Part # F05222
Fletcher FSC Blades (10 Per Tube).

Part # F03130
Replacement Carbide Wheel for Fletcher Oval/Circle Cutter

Part # 1586
Heavy duty blade used for suitable plexi acrylic substrate sizing. For use with the Logan F700-1 Wall Mount Multi-Material Cutter. Reversible and sold individually.

Part # 489
Replacement Blades United's Own blades! Packs of 5. United version of the dexter #3. Replacement Blade bulk pak.

Part # F03126
Carbide Glass Wheel Unit. Used in the Fletcher-Terry model 3000 and 3100 cutting machines.
124 Degree cutting wheel angle

Part # 494
Decor Brand - No. 11 Blade - Designed with an extremely fine, sharp point for fine angle cutting, stripping, trimming, potting compounds, excess flashing, correcting printed circuits, cleaning excess solder, gasket cutting and de-burring.

Part # 479
For use with Logan Cutter #650 and Logan Cutter #660

Part # 665
45 degree bevel push type cutter with retractable blade holder. Adaptable to rail kits and cutting boards. Logan Model 2000 Uses Item # 490 Blades.

PART # 500
The original Dexter Mat Cutter, strong and experienced. Dexter makes mat cutting easy for perfect straight or bevel cuts with no chance of ragged or untidy edges. Fast straight or bevel cuts with a straight edge. Adjustable cutting depth for cutting or scoring. Five No. 3 Dexter precision blades included. Built-in aligning sighting. Chrome plated for a lifetime of smooth clean performance. Uses No. 2403 or No. 3404 Blades.

Part # F05012
Fletcher mat cutting blades for the Fletcher 2000, Fletcher 2100 and the Fletcher 2200. These blades are used for standard matboard cutting.

Part # F05015
100 per pack Fletcher mat blade for 2000, 2100 or 2200 Fletcher mat cutters.

Part # 1330
A single bevel blades designed not to flex at corners when cutting ragmat or 6-8 ply board.
.015 Single Edge

Part # 1327
CHN 1200 .012 thick. 100 blade dispenser box.

Part # 1328
CHN 1500 .015 thick. For Rag Mats 100 blades per box.

Part # 1329
A single bevel blades designed not to flex at corners when cutting ragmat or 6-8 ply board.
.012 Single Edge

Part # F05016
Fletcher single bevel blades...will not flex ...used for cutting bevels on 6 ply and 8 ply board...also for cutting down double thick backing board.

Part # F05235
Replacement blades for Fletcher F-60. Ten per box.