Mounting Tissues & Supplies

Part # 989
PolyBond™ is the strongest bonding glue specifically formulated for polystyrene mouldings. PolyBond™ sets quickly and drys clear. The 2oz. bottle has a convenient twist-off cap and a control drop applicator for ease of use.
Better and stronger than Plastibond and other Poly Adhesives.

Part # 990
PolyBond™ is the strongest bonding glue specifically formulated for polystyrene mouldings. PolyBond™ sets quickly and drys clear. The 4oz. bottle has a convenient twist-off cap and a control drop applicator for ease of use.
Better and stronger than Plastibond and other Poly Adhesives.

Part # 271
Made of smooth 1 ply chip board coated with silicone on both sides.

Part # 717
Gudy 870 positionable mounting adhesive is a special pressure-activiated synthetic adhesive that allows the item being mounted to be positioned and repositioned until it is correctly aligned before pressure is applied to make a permanent bond. Requires no heat, liquids, or special equipment. Direct replacement for discontinued 3M PMA 568.

Part # 972
UnStik is a special releasing solvent used to remove pressure sensitive and heat-assist mounting adhesives from artwork and mouting press parts.

Part # 980
Mount posters, RC photos, prints, light fabrics and vinyls to regular or coated board and foam board with this superior, durable adhesive. It is pH neutral, water soluble, freeze thaw stable and sets up quickly with a 20 minute set up time. Apply with brush or roller for use by hand, cold vacuum press or potdevin Roll Laminator.

Part # 691
For a smooth and even lamination, a sponge overlay is recommended for use in vacuum presses. Can be cut.

Part # 719
Gudy 870 positionable mounting adhesive is a special pressure-activiated synthetic adhesive that allows the item being mounted to be positioned and repositioned until it is correctly aligned before pressure is applied to make a permanent bond. Requires no heat, liquids, or special equipment. Direct replacement for discontinued 3M PMA 568.

Part # 807
Buffermount is an Acid-Free and Reversible Low-Temp Adhesive Tissue. Activates at 160 to 190°F.

Part # 270
Made of smooth 1 ply chip board coated with silicone on both sides.

Part # 787
Permanent General-Purpose Dry Mount Tissue for most types of mounting projects. Mounts at 190° in 11/2 minutes on a mechanical press, and 2-3 minutes on a vacuum press.

Part # 800
Reuseable smooth, white paper treated with silicon on both sides to protect the dry mount press platen and your materials.

Part # 808
Buffermount is an Acid-Free and Reversible Low-Temp Adhesive Tissue. Activates at 160 to 190°F.

Part # 802
Reuseable smooth, white paper treated with silicon on both sides to protect the dry mount press platen and your materials.

Part # 974
Reuseable smooth, white paper coated with silicone on one side to protect the dry mount press platen.

Part # 788
Permanent General-Purpose Dry Mount Tissue for most types of mounting projects. Mounts at 190° in 11/2 minutes on a mechanical press, and 2-3 minutes on a vacuum press.

Part # 983
Reuseable smooth, white paper coated with silicone on one side to protect the dry mount press platen.

Part # 964
A sparkling Gloss smooth finish. 4 mil thickness. Protects from UV damage as well as dirt, moisture, scratches, and fading. 5 mil thickness.

Part # 672
Trimount is an Excellent Addition To Drytac' S Amazing Range of Mounting Adhesives, This Trimount Dry Mounting Tissue Is A Premium Product Suitable For All Your Prints!

Part # 971
A Suede textured finish that reduces glare and produces a soft appearance. 5 mil thickness. Protects from UV damage as well as dirt, moisture, scratches, and fading. 5 mil thickness.

Part # 789
Permanent General-Purpose Dry Mount Tissue for most types of mounting projects. Mounts at 190° in 11/2 minutes on a mechanical press, and 2-3 minutes on a vacuum press.

Part # 966
A soft Satin Matte smooth finish that is moderately reflective to enhances colors while reducing glare for clear, easy viewing. 3 mil thickness. Protects from UV damage as well as dirt, moisture, scratches, and fading. 5 mil thickness.

Part # 969
A distinctive Canvas-like texture and soft sheen add surface interest to portraits, landscapes and reproductions. Protects from UV damage as well as dirt, moisture, scratches, and fading. 5 mil thickness.

Part # 674
An Excellent Addition To Drytac's Amazing Range of Mounting Adhesives, This Tri-mount Dry Mounting Tissue Is A Premium Product Suitable For All Your Prints!

Part # 673
An Excellent Addition To Drytac' S Amazing Range of Mounting Adhesives, This Trimount Dry Mounting Tissue Is A Premium Product Suitable For All Your Prints!

Part # 675
An Excellent Addition To Drytac' S Amazing Range of Mounting Adhesives, This Trimount Dry Mounting Tissue Is A Premium Product Suitable For All Your Prints!