Liquid & Spray Adhesives

Part # 989
PolyBond™ is the strongest bonding glue specifically formulated for polystyrene mouldings. PolyBond™ sets quickly and drys clear. The 2oz. bottle has a convenient twist-off cap and a control drop applicator for ease of use.
Better and stronger than Plastibond and other Poly Adhesives.

Part # 1515
GE Seal Silicone Seal dries clear. It skims over in 10 minutes, dries to the touch in 1 hour, and is fulled cured in 24 hours. Silicone Seal is the ideal material for Paper projects and is a general purpose adhesive for crafts. It is particularly useful for joining hard materials to each other such as glass to marble, etc.

Part # L9011008
Lineco White Neutral pH Adhesive

Lineco's acid-free adhesive has excellent lay-flat properties and dries clear. Easy to use polyvinyl acetatate (PVA) formula is fast setting, remoistenable with water, and fully reversible. This adhesive was formulated specifically for preservation materials and should not become brittle with age.
- Adheres to most surfaces
- 8 oz

Part # 899
All-In-One patented removal system for:

Stickers Price Stickers, Labels Candle Wax & Gum
Tape and Much More!.. Attached tool makes removal of pesky stickers easy and safe... Un-du instantly and safely removes commonly used mounting adhesives, such as ATG tapes, spray mount adhesives, heat activated foam boards and much more. Works on contact without leaving any residue or stains.

Part # GP
Picture Framer's White Glue White glue is made from pure poly-vinyl acetate resins compounded to give maximum strength, penetration and bond to all wood and other commonly used materials. It is plasticized to give the bond resiliency. Ready to use, it makes a quick, permanent bond. Tinsel strength up to 3000 lbs sq in. Leave no stain or glue line. Available in pint and gallon plastic bottles.

Part # 475
Krylon Spray Adhesive #7010

Part # 770
3M Hot Melt Glue Sticks 1/2" x 12"
(twelve sticks per pound)

Part # 596
3M Spray Mount bonds practically any lightweight material instantly, yet allows work to be lifted and repositioned. This spray adhesive requires only one surface application. Bonds do not yellow, nor do they become brittle or flaky.

Part # 597
A clear aerosol adhesive that produces high strength bonds in seconds. Perfect for mounting photos and other artwork. Just spray the back of the print, let dry until tacky, and press into position. 3M - #6094.

Part # 990
PolyBond™ is the strongest bonding glue specifically formulated for polystyrene mouldings. PolyBond™ sets quickly and drys clear. The 4oz. bottle has a convenient twist-off cap and a control drop applicator for ease of use.
Better and stronger than Plastibond and other Poly Adhesives.

Part # 595
3M Super 77 Multipurpose Adhesive Spray

• Versatile adhesive that bonds a wide range of lightweight materials
• Provides professional, industrial strength for demanding applications
• Offers a fast, aggressive tack for a quick bond that reduces set time
• Bonds paper, cardboard, fabric, insulation, plastic, metal, wood and more

Part # 311
Decor Plus Polystyrene Glue

Part # 612
Box of 6,000 high-quality v-nails for use in Pistorius, Inmes, Euro, Guille, Cassese* and Morso Underpinners. True pulling power with high-grade steel.
Compatible with Cassese cartridges.
*Cartridges not included.
*Refill and Reuse your Cassese Cartridges to save money.

Part # 900
All-In-One patented removal system for:

Stickers Price Stickers
Labels Candle Wax & Gum
Tape and Much More!

Attached tool makes removal of pesky stickers easy and safe.

Un-Du instantly and safely removes commonly used mounting adhesives, such as ATG tapes, spray mount adhesives, heat activated foam boards and much more. Works on contact without leaving any residue or stains.

Part # 613
Box of 6,000 high quality v-nails for use in Pistorius, Inmes, Euro, Guille, Cassese* and Morso Underpinners. True pulling power with high grade steel.
Compatible with Cassese cartridges.
*Cartridges not included.
*Refill and Reuse your Cassese Cartridges to save money.

Part # 658
Specially formulated to permanently bond these materials to wood, rigid plastics, or themselves. Very fast tacking. Controlled lace-like spray pattern. Works equally well on both urethane and latex foams. Delivers soft glue line. High solids, high coverage. Dries tack and odor free.

Part # 972
UnStik is a special releasing solvent used to remove pressure sensitive and heat-assist mounting adhesives from artwork and mouting press parts.

Part # 1340
This special glue is made to mount fabrics on matboard, liners, chipboard, etc. Apply with a brush or a paint roller to an even coat, place material down and flatten. Can be used with linen, burlap, silk, velvet, velveteen, canvas, polyester, etc. Waterproof when dry, water soluble, can be heat reactivated.

Part # 610
All-Purpose Mounting Adhesive for the Picture Framing and Photographic Industries. Bonds posters, prints, RC photo and fabrics.
Can be applied with roller, brush or used in Potdevin Roll Laminators.

• Acid-Free
• Non-Toxic
• Water Soluble
• Non-Solvents
• Freeze-Thaw Stable

Part # 3649
Adhesive Works on posters, prints, RC photos, fabrics. Economical and easy to use. No mixing required apply directly from container. United's vacuum paste is pH neutral and water reversible. Can be used with any regular or coated mounting stock foam core board also. Apply a thin layer of adhesive to mount board with roller or brush. Set your print in place. Cover with a clean sheet of Kraft paper, press in place for 60 seconds, and you have a perfect mount every time.

Part # 980
Mount posters, RC photos, prints, light fabrics and vinyls to regular or coated board and foam board with this superior, durable adhesive. It is pH neutral, water soluble, freeze thaw stable and sets up quickly with a 20 minute set up time. Apply with brush or roller for use by hand, cold vacuum press or potdevin Roll Laminator.

Part # GG
Picture Framer's White Glue White glue is made from pure poly-vinyl acetate resins compounded to give maximum strength, penetration and bond to all wood and other commonly used materials. It is plasticized to give the bond resiliency. Ready to use, it makes a quick, permanent bond. Tinsel strength up to 3000 lbs sq in. Leave no stain or glue line. Available in pint and gallon plastic bottles.

Part # 769