Equipment

Part # F08711
Push Points Zinc Coated. Push into place.
Approximately 70 per pkg

Part # 493
No. 11 Blade - Designed with an extremely fine, sharp point for fine angle cutting, stripping, trimming, potting compounds, excess flashing, correcting printed circuits, cleaning excess solder, gasket cutting and de-burring.

Part # 496
No. 24 Blade - Designed with an extremely fine, sharp point for fine angle cutting, stripping, trimming, potting compounds, excess flashing, correcting printed circuits, cleaning excess solder, gasket cutting and de-burring.

Part # 488
Replacement Blades United's Own blades! Packs of 5. United version of the dexter #3. Replacement Blade bulk pak.

Part # 492
Decor Brand - X-Acto Style Knives No. 1. For carving, cutting, etching, hollowing, piercing, sawing, scoring, scraping, scribing, slicing, stripping and trimming.

Part # 502
Dexter Blades For the Dexter Mat Cutter. Packs of 5. Or bulk pak of 100. #054170-P for paks. #54160 for bulk of 100.

Part # 498

• Heavy Duty/Bright Aluminum Finish
• Aluminum die-cast in two sections provides blade storage. Has handy hang hole.
• Furnished with blades.
• Uses No. 486 or No. 487 blade

Part # 768
Molded thick black rubber boot fits comfortably in hand for better control, absorbs impact. Bold, clear numbers on bright yellow blades. Rigid blade provides excellent stand-out, with protective acrylic coating. Fractional Blade.

Part # 495
X-Acto Knives For carving, cutting, etching, hollowing, piercing, sawing, scoring, scraping, scribing, slicing, stripping and trimming.

Part # 497
Retractable Blade Scraper Uses single-edge razor blades. Push-pull action exposes blade for scraping, retracts it when not in use. Fits in pocket. Comes complete with 1 blade.

Part # 499
Retractable Blade Handle Locks in 3 positions.
Holds 3 blades in handle.
Uses No. 486 or No. 487 blade.

Part # 08911
Framer's Points 200 points per pkg. Used with the Frame_Mate only.
THIS ITEM DOES NOT WORK IN FLETCHER FRAMEMASTER F08950

Part # 480
Single edge razor blades. First quality. (No. 9) Packs of 100

Part # 481
Heavy duty single edge razor blades. First quality. (No. 12) packs of 100.

Part # 482
Heavy duty razor blade. (No. 12) No notches as supplied with the Pre 1980 C&H cutters.

Part # 374
Pressure Sensitive Paper Tape 2" x 60 yds. Kraft paper tape. Pressure Sensitive. Ideal for sealing the back of pictures from dust and dirt. Gives a neat, easy seal when wrapping your finished work. Matches kraft paper.

Part # 994
Logan F54 Rigid Points

Part # 995
Logan F53 Flex Points

Part # 375
Pressure Sensitive Paper Tape 2" x 60 yds. Kraft paper tape. Pressure Sensitive. Ideal for sealing the back of pictures from dust and dirt. Gives a neat, easy seal when wrapping your finished work. Matches kraft paper.

Part # 654
Featuring rubber-tipped, ratcheting temples for a comfortable fit. Anti-fog, Scratch-resistant lens for improved vision.

Part # F09517
PullMate The PullMate is a handy tool for quick and easy removal of Fletcher Framer's Points from wood frames. The notced end of the PullMate fits over the point to provide a tight grasp for pulling.

Part # 776
Decor Brand - Box of 5 cartridges with 280 V-Nails per cartridge and 1,400 per box for use in Cassese Underpinners. Strong pulling power. High grade steel. Manufactured to the premium standard you come to expect from United Mfrs Supplies and Decor Moulding. Money Back Guarantee!
"Your one source for all of your picture frame supplies"

Part # 777
Decor Brand - Box of 5 cartridges with 280 V-Nails per cartridge and 1,400 per box for use in Cassese Underpinners. Strong pulling power. High grade steel. Manufactured to the premium standard you come to expect from United Mfrs Supplies and Decor Moulding. Money Back Guarantee!
"Your one source for all of your picture frame supplies"

Part # F09515
PushMate The PushMate inserts push points, triangle points and diamond points into wood frames and window sash to hold glass and framing materials firmly in place. Simply align PushMate with point and use even pressure to push point into frame or sash.

Part # 483
United mat cutter blades.
.012 gauge for regular mat board. For bevel cuts.

Part # 484
.015 gauge for rag board. Mat cutter blades

Part # 485
Decor single bevel blades .015 bevel
Made in USA.

Part # 478
Decor single bevel blades .012 bevel
Made in USA.

Part # 637
Ultra-Lock Points are engineered to perform. Used to keep glass or acrylic, matboard and backing board firmly inside your frame, and provide the stability and security needed for hanging or displaying your art. Stacked Rigid Points do not bend and are intended for permanent installations.

Part # 638
Ultra-Lock Points are engineered to perform. Used to keep glass or acrylic, matboard and backing board firmly inside your frame, and provide the stability and security needed for hanging or displaying your art. Stacked Flexi Points bend and allow customers to change artwork at will.

Part # 778
Decor Brand - Box of 5 cartridges with 280 V-Nails per cartridge and 1,400 per box for use in Cassese Underpinners. Strong pulling power. High grade steel. Manufactured to the premium standard you come to expect from United Mfrs Supplies and Decor Moulding. Money Back Guarantee!
"Your one source for all of your picture frame supplies"

Part # 779
Decor Brand - Box of 5 cartridges with 280 V-Nails per cartridge and 1,400 per box for use in Cassese Underpinners. Strong pulling power. High grade steel. Manufactured to the premium standard you come to expect from United Mfrs Supplies and Decor Moulding. Money Back Guarantee!
"Your one source for all of your picture frame supplies"

Part # 780
Decor Brand - Box of 5 cartridges with 280 V-Nails per cartridge and 1,400 per box for use in Cassese Underpinners. Strong pulling power. High grade steel. Manufactured to the premium standard you come to expect from United Mfrs Supplies and Decor Moulding. Money Back Guarantee!
"Your one source for all of your picture frame supplies"

Part # 781
Decor Brand - Box of 5 cartridges with 280 V-Nails per cartridge and 1,400 per box for use in Cassese Underpinners. Strong pulling power. High grade steel. Manufactured to the premium standard you come to expect from United Mfrs Supplies and Decor Moulding. Money Back Guarantee!
"Your one source for all of your picture frame supplies"

Part # 782
Decor Brand - Box of 5 cartridges with 280 V-Nails per cartridge and 1,400 per box for use in Cassese Underpinners. Strong pulling power. High grade steel. Manufactured to the premium standard you come to expect from United Mfrs Supplies and Decor Moulding. Money Back Guarantee!
"Your one source for all of your picture frame supplies"

Part # 783
Decor Brand - Box of 5 cartridges with 280 V-Nails per cartridge and 1,400 per box for use in Cassese Underpinners. Strong pulling power. High grade steel. Manufactured to the premium standard you come to expect from United Mfrs Supplies and Decor Moulding. Money Back Guarantee!
"Your one source for all of your picture frame supplies"

Part # F05001

Mat Blade for Fletcher model #3000 multi-material cutter

Part # 784
Decor Framer's Points Approx 3000 Stacked Points per package. Compatible with Decor Hard Point Driver Item# 868 and Fletcher Framemaster Item # F07500

Part # F05711
All 8400 series cutters use the #3531M.
Do not use the 4232 in these machines.

Part # 642
F-18 Brads 11/16" - 5000 per package