Home > Picture Frame Hardware > Hardware > Cleat Hangers
Sort By:
1
Pic-Sure-Stays Hook Ups Adjustable Hangers heavy duty cleat hanger for pictures
Pic-Sure-Stays
Our Price: $1.75
Super Cleat Hanger
Our Price: $4.95
Part # 2907
These little vinyl stays self-stick to the lower back corners of hanging picture frames and then lock onto the wall with fine steel needles. They do not harm wallpaper, painted or paneled wall surfaces and no glue or tape comes in contact with the wall. 12 Stays Per Card.
Part # 1313
Hook-Ups! Adjustable Picture Hangers provide a secure, two-point mounting system that gives you all these great features... - Level pictures with the touch of a finger - Saves hours of installation time Package Includes: 1 Pair of Hook-Ups, Hardware for wood AND metal frames
Part # 870
Extruded aluminum with pre-drilled mounting holes every 4 inches for easy mounting into wall studs for maximum strength. Designed for heavy and over-sized frames and framed mirrors.
59 inches long.
cardboard and fomeboard hanger heavy duty cleat hanger for pictures L-pins
Exhibition "L" Pins
Our Price: $16.35
Part # 4191
Kwik Hanger - For attachment to foam board - Minimum 3/16" - 4.8mm thick and corrugated board
Part # 871
Extruded aluminum with pre-drilled mounting holes every 4" for easy mounting into studs for maximum strength. Designed for heavy or oversized picture frames.
Part # 6148-7016S
1-1/8" long with a 3/8 inch bend. This unique steel picture mounting device holds matted pictures, small frames and artwork to the wall. Can be inserted by hand or with a small hammer. The L shaped pin has a thin sharp point and makes a small hole. Hundreds of uses in the shop.

(Per 12 cards ea. w/ 20 pins)
fireplace and brickwall hangers Picture Poster Hanger Cleat Hanger
Brick Clips
( 12 Per Bx )

Our Price: $18.25
Part # 4336
Fits standard brick 2 - 1/8" to 1 - 1/2" Minimum of 1/8" mortar join is required for a secure fit.

-Easily clips on or off.

-Each clip supports up to 25 lbs.United Mfrs. your one source for all your picture frame supplies
Part # 1371
Picture Poster Hanger Stainless steel prong hanger for hanging pictures, posters, etc. that are mounted on foam core or mat board. Can be used with any board as thin as 3/16" without penetrating to the front of the board. Simple to Use: Just push into board, when flush, push in center prong, and it will lock.
Part # 765
Easy to cut-to-size extruded aluminum with 3/16" pre-drilled mounting holes every 4" for easy mounting on walls or into wall studs for maximum strength.
1.2mm thick x 1 1/16" wide
Package of 20
Flanger Flanger picture hangers Cleat Hanger
Narrow Flanger
50 Sets

Our Price: $20.29
Large Flanger
( 40 Sets )

Our Price: $20.29
Part # 1307
For narrowest mouldings (with minimum 1/4" read edge. Supports 50 lbs) FLANGER Picture Frame Hangers They keep ya hangin' For all wooden frames! Prevents bowing and pull out problems! Flanger Hangers have been engineer tested with frames loaded with over 70 lbs. Screw eyes and plates failed under the same conditions. Easy to install, the mounting holes are centered for correct alignment every time. Flanger Hangers don't protrude, so you work always looks first class.
Part # 1309
Wide (fits 1" - 4" rear edge. Supports 100 lbs.) FLANGER Picture Frame Hangers They keep ya hangin' For all wooden frames! Prevents bowing and pull out problems! Flanger Hangers have been engineer tested with frames loaded with over 70 lbs. Screw eyes and plates failed under the same conditions. Easy to install, the mounting holes are centered for correct alignment every time. Flanger Hangers don't protrude, so you work always looks first class. Boxed in sets for co
Part # 766
Easy to cut-to-size extruded aluminum with 3/16" pre-drilled mounting holes every 4" for easy mounting on walls or into wall studs for maximum strength.
  • 2.0mm thick x 1 1/4" wide
  • Package of 20
cardboard and fomeboard hanger Canvas Hanger cardboard and fomeboard hanger
Part # 4191
Kwik Hanger - For attachment to foam board - Minimum 3/16" - 4.8mm thick and corrugated board
Part # 6149
Used to hang stretched canvas. Slips under the stretcher bas and allows use of a nail to hang the canvas.
Part # 4265
Sawtooth Hangers - Picture Poster Hangers
Picture Poster Hanger
Part # 1371H
Picture Poster Hanger Stainless steel prong hanger for hanging pictures, posters, etc. that are mounted on foam core or mat board. Can be used with any board as thin as 3/16" without penetrating to the front of the board. Simple to Use: Just push into board, when flush, push in center prong, and it will lock.
   
 
1