Part # L9011008
Lineco White Neutral pH Adhesive
Lineco's acid-free adhesive has excellent lay-flat properties and dries clear. Easy to use polyvinyl acetatate (PVA) formula is fast setting, remoistenable with water, and fully reversible. This adhesive was formulated specifically for preservation materials and should not become brittle with age.
- Adheres to most surfaces
- 8 oz or 1 gallon
Part # 980
Mount posters, RC photos, prints, light fabrics and vinyls to regular or coated board and foam board with this superior, durable adhesive. It is pH neutral, water soluble, freeze thaw stable and sets up quickly with a 20 minute set up time. Apply with brush or roller for use by hand, cold vacuum press or potdevin Roll Laminator.
Part # 973
Seal VacuGlue 300 1/2 gallon VacuGlue 300 is a
natural vegetable starch based adhesive that is pH neutral (Acid free),
water soluble, odorless, and freeze-thaw stable.
Part # 610
All-Purpose Mounting Adhesive for the Picture Framing and Photographic Industries. Bonds posters, prints, RC photo and fabrics.
Can be applied with roller, brush or used in Potdevin Roll Laminators.
- Water Soluble
- Freeze-Thaw Stable
Part # 3649
Adhesive Works on posters, prints, RC photos, fabrics. Economical and easy to use. No mixing required apply directly from container. United's vacuum paste is pH neutral and water reversible. Can be used with any regular or coated mounting stock foam core board also. Apply a thin layer of adhesive to mount board with roller or brush. Set your print in place. Cover with a clean sheet of Kraft paper, press in place for 60 seconds, and you have a perfect mount every time.