Home > Frame Touch-up Supplies > Picture Frame Hardware > Turnbuttons
Sort By:
Page of 1
NULL Spring Clips (Blued) Turnbuttons
The infinity hanger is the only hanger in the framing industry encompassess a wide range of uses. It can be used as a turnbutton, or a low profile alternative to screw eyes. One of the biggest innovations in the framing industry. Part # 1940
Spring Clips Blue Finish Uses No. 3210 4 gauge screw 1/4" X 2".<...Used to hold backing board and artwork into the frame ...can be easily moved to the side to change the picture
Nickel Plated Turnbutton Black Finish
turnbuttons Spring Clips (Black) turnbuttons
Nickel Plated Turnbutton Black Finish Part # 1953
Spring Chips Black Finish Uses No. 3210 4 gauge screw 1/2" X 3". Spring screws on to moulding. Then swivels on to backing board to hold picture in place.
Part # 1874
Nickel Plated Turnbutton Uses a No. 100 RH wood screw, 3 gauge (screws not included)
turnbuttons Nickel Plated Turnbutton (box of 1000) Brass Plated Turnbutton (Box of 1000)
Part # 1904
Brass Plated Turnbutton (Box of 1000)
Uses screw #101 RH brass wood screw, 1 gauge (screws not included)
Part # 1874
Nickel Plated Turnbutton Uses a No. 100 RH wood screw, 3 gauge (screws not included)
Part # 1904
Brass Plated Turnbutton (Box of 1000)
Uses screw #101 RH brass wood screw, 1 gauge (screws not included)
turnbuttons picture frame turnbuttons Nickel Plated Turnbutton (box of 1000)
Part # 1875
Nickel Plated Turnbutton Uses a No. 100 RH wood screw, 3 gauge (screws not included). Slight bend in turnbutton to allow for a tighter fit.
Nickel Plated Turnbutton
Uses a No. 99 FH wood screw, 4 gauge
Screws not included.
Part # 1875
Nickel Plated Turnbutton Uses a No. 100 RH wood screw, 3 gauge (screws not included). Slight bend in turnbutton to allow for a tighter fit.
picture frame turnbuttons NULL Spring Clips (Blued)
Nickel Plated Turnbutton
Uses a No. 99 FH wood screw, 4 gauge
Screws not included.
The infinity hanger is the only hanger in the framing industry encompassess a wide range of uses. It can be used as a turnbutton, or a low profile alternative to screw eyes. One of the biggest innovations in the framing industry. Part # 1940
Spring Clips Blue Finish Uses No. 3210 4 gauge screw 1/4" X 2".<...Used to hold backing board and artwork into the frame ...can be easily moved to the side to change the picture
Turnbuttons turnbuttons Spring Clips (Black)
Nickel Plated Turnbutton Black Finish Nickel Plated Turnbutton Black Finish Part # 1953
Spring Chips Black Finish Uses No. 3210 4 gauge screw 1/2" X 3". Spring screws on to moulding. Then swivels on to backing board to hold picture in place.