Home > Picture Frame Hardware > Metal Frame Hardware
Sort By:
Page of 2
metal section packaged hardware metal frame hardware Back Up Plate
Back Up Plate (100 ct)
Our Price: $2.40
Part # 3776
Packaged Metal Section Hardware Package Contains: -4 pcs No. 3772 -4 pcs No. 3773 -8 pcs No. 3768 -2 pcs No. 3774 hanger
Part # 3777
Packaged Metal Section Hardware Package contains: -4 pcs No. 3772 -4 pcs No. 3773 -8 pcs No. 3768 -2 pcs No. 3775 hanger
Part # 3773
Back Plate
Snap In Hanger Z.P. Spring Clips Spring clip 3/8 for frames
Snap In Hanger (100 ct)
Our Price: $2.45
Spring (100 ct)
Our Price: $2.75
Part # 3774
Fits Alumaframe, Designer, Nielson, Clark & other similar mouldings. Snap In Hanger
Part # 3768
Fits Alumaframe, Designer, Nielson, Clark & other similar mouldings. 3/8" Spring Clips For all metal frames Zinc Plated Spring clip grip for easy removal.
tempered aluminum used to hold pictures into frames with metal frames.
back plate snap hangers Euro Hanger
Back Plate (100 ct)
Our Price: $2.90
Snap Hanger (100 ct)
Our Price: $4.20
Euro Hanger (100 ct)
Our Price: $6.40
Part # HA17
Works in conjunction with the HA07. For all standard metal frames
No need to disassemble frame.  this hanger snaps right into channel and is ready to wire Part # 4677
Fits Alumaframe, Designer, Nielson, Clark & other similar mouldings. Eurohanger It is a heavy duty straight hanger with a tear drop hole for easy wiring. Use with large 1/4 - 28 headless slotted set screw prestarted. Drops in after frame is assembled. Very large hole for wire.
Screw In Hanger Tapped Angle Spring clip 3/8 for frames
Tapped Angle (100 ct)
Our Price: $8.55
Spring (500 ct)
Our Price: $13.50
Part # 3775
Fits Alumaframe, Designer, Nielson, Clark & other similar mouldings. Screw Hanger
Part # 3772
Fits Alumaframe, Designer, Nielson, Clark & other similar mouldings. Tapped Corners With Screws Inserted
tempered aluminum used to hold pictures into frames with metal frames.
back plate quick tapped corner for metal frames tapped corner for metal frames
Back Plate (500 ct)
Our Price: $13.75
Quick Corner (100 ct)
Our Price: $15.25
Tapped Corner (100 ct)
Our Price: $15.90
Part # HA17
Works in conjunction with the HA07. For all standard metal frames
This tapped corner for metal frames  does not require back plate.it has an elongated tapped screw.  Should be used in frames 11x14 or smaller Used in conjunction with the HA17
Snap In Hanger snap hangers Z.P. Spring Clips
Snap In Hanger (1000 ct)
Our Price: $20.15
Snap Hanger (500 ct)
Our Price: $20.25
Part # 3774
Fits Alumaframe, Designer, Nielson, Clark & other similar mouldings. Snap In Hanger
No need to disassemble frame.  this hanger snaps right into channel and is ready to wire Part # 3768
Fits Alumaframe, Designer, Nielson, Clark & other similar mouldings. 3/8" Spring Clips For all metal frames Zinc Plated Spring clip grip for easy removal.
Back Up Plate Spring clip 3/8 for frames back plate
Back Up Plate (1000 ct)
Our Price: $20.85
Spring (1000 ct)
Our Price: $25.50
Back Plate (1000 ct)
Our Price: $26.50
Part # 3773
Back Plate
tempered aluminum used to hold pictures into frames with metal frames. Part # HA17
Works in conjunction with the HA07. For all standard metal frames
snap hangers Euro Hanger metal picture frame hardware
Snap Hanger (1000 ct)
Our Price: $39.00
Euro Hanger (1000 ct)
Our Price: $57.55
No need to disassemble frame.  this hanger snaps right into channel and is ready to wire Part # 4677
Fits Alumaframe, Designer, Nielson, Clark & other similar mouldings. Eurohanger It is a heavy duty straight hanger with a tear drop hole for easy wiring. Use with large 1/4 - 28 headless slotted set screw prestarted. Drops in after frame is assembled. Very large hole for wire.
Part # 4208
Bulk Packaged 100 Sets -400 bottom plates -400 top plates -800 3/8" Spring Clips -200 Snap Hangers -200 Bumpers ENOUGH TO DO 100 FRAMES.
Screw In Hanger quick tapped corner for metal frames metal frame hardware for bulk pak
Screw In Hanger (1000 ct)
Our Price: $68.30
Quick Corner (500 ct)
Our Price: $73.00
Alum. Frame Hardware
Our Price: $74.95
Part # 3775
Fits Alumaframe, Designer, Nielson, Clark & other similar mouldings. Screw Hanger
This tapped corner for metal frames  does not require back plate.it has an elongated tapped screw.  Should be used in frames 11x14 or smaller Part # 4818
Bulk Packaged 100 Sets -400 bottom plates -400 top plates -800 3/8" Spring Clips -200 EuroHangers -200 Bumpers
Tapped Angle tapped corner for metal frames metal frame hardware
Tapped Angle (1000 ct)
Our Price: $75.75
Tapped Corner (500 ct)
Our Price: $76.25
Part # 3772
Fits Alumaframe, Designer, Nielson, Clark & other similar mouldings. Tapped Corners With Screws Inserted
Used in conjunction with the HA17 Part # 4209
Bulk Packaged 100 Sets -400 bottom plates -400 top plates -800 3/8" Spring Clips -200 Screw Hangers -200 Bumpers ENOUGH TO DO 100 FRAMES