Home > Mounting Tissues & Supplies > Uniteds Dry Mounting Tissue
Sort By:
Page of 1
Mounting tissue Mounting tissue dry mount tissue
Part # 6121
Mounting tissue that will cover the full SPECTRUM of your mounting needs! This paper based tissue is breathable and removeable. SPECTRUM MOUNT works well with RC coated prints as well as Lithographs and bond paper. With its breathable paper liner, low activating temperature of 165 degrees
F and unique removeability it is a great alternative to Colormount , fotoflat, SR56 as well as MT-5. A quality product at 1/2 the cost of most leading brands.
Part # 6121
Mounting tissue that will cover the full SPECTRUM of your mounting needs! This paper based tissue is breathable and removeable. SPECTRUM MOUNT works well with RC coated prints as well as Lithographs and bond paper. With its breathable paper liner, low activating temperature of 165 degrees
F and unique removeability it is a great alternative to Colormount , fotoflat, SR56 as well as MT-5. A quality product at 1/2 the cost of most leading brands.
Part # 5919
A glassine tissue with a heavy adhesive on both sides. A permanent bonding tissue. No bubbles, no shrinkage of prints.
Recommended for posters, photographs, mounting fabrics, etc. THIS TISSUE IS A GREAT UTILITY TISSUE FOR DRY MOUNTING POSTERS AND PRINTS.

SR-56 is a premium quality, multi-purpose 3.0 mil (75 micron) dry mounting tissue. This permanent, breathable tissue is recommended for bonding resin-coated photographs, posters and printed materials to most smooth surface substrates. The pH-neutral heat-activated adhesive will bond at temperatures as low as 185°F (85°C).

SUGGESTED APPLICATIONS: SR_56 is suitable for use in all makes of dry mounting presses. SR-56 is recommended for bonding RC photographic paper and printed materials to smooth surfaces. It equals or surpasses all dry mounting tissues on the market.
Additional Information
Technical Specification

Carrier: Paper/off-white
Adhesive Bond: Permanent
Adhesive Base: Solvent acrylic
Initial Tack: None
Precessing Temperature: 85°C-100° (185°F-212°F)
Release Liner: None
Dwell Time: 30-90 seconds
Application Picture Framing/Photography
dry mount tissue Mounting tissue dry mount tissue
Part # 5919
A glassine tissue with a heavy adhesive on both sides. A permanent bonding tissue. No bubbles, no shrinkage of prints.
Recommended for posters, photographs, mounting fabrics, etc. THIS TISSUE IS A GREAT UTILITY TISSUE FOR DRY MOUNTING POSTERS AND PRINTS.

SR-56 is a premium quality, multi-purpose 3.0 mil (75 micron) dry mounting tissue. This permanent, breathable tissue is recommended for bonding resin-coated photographs, posters and printed materials to most smooth surface substrates. The pH-neutral heat-activated adhesive will bond at temperatures as low as 185°F (85°C).

SUGGESTED APPLICATIONS: SR_56 is suitable for use in all makes of dry mounting presses. SR-56 is recommended for bonding RC photographic paper and printed materials to smooth surfaces. It equals or surpasses all dry mounting tissues on the market.
Additional Information
Technical Specification

Carrier: Paper/off-white
Adhesive Bond: Permanent
Adhesive Base: Solvent acrylic
Initial Tack: None
Precessing Temperature: 85°C-100° (185°F-212°F)
Release Liner: None
Dwell Time: 30-90 seconds
Application Picture Framing/Photography
Part # 6121
Mounting tissue that will cover the full SPECTRUM of your mounting needs! This paper based tissue is breathable and removeable. SPECTRUM MOUNT works well with RC coated prints as well as Lithographs and bond paper. With its breathable paper liner, low activating temperature of 165 degrees
F and unique removeability it is a great alternative to Colormount , fotoflat, SR56 as well as MT-5. A quality product at 1/2 the cost of most leading brands.
Part # 5919
A glassine tissue with a heavy adhesive on both sides. A permanent bonding tissue. No bubbles, no shrinkage of prints.
Recommended for posters, photographs, mounting fabrics, etc. THIS TISSUE IS A GREAT UTILITY TISSUE FOR DRY MOUNTING POSTERS AND PRINTS.

SR-56 is a premium quality, multi-purpose 3.0 mil (75 micron) dry mounting tissue. This permanent, breathable tissue is recommended for bonding resin-coated photographs, posters and printed materials to most smooth surface substrates. The pH-neutral heat-activated adhesive will bond at temperatures as low as 185°F (85°C).

SUGGESTED APPLICATIONS: SR_56 is suitable for use in all makes of dry mounting presses. SR-56 is recommended for bonding RC photographic paper and printed materials to smooth surfaces. It equals or surpasses all dry mounting tissues on the market.
Additional Information
Technical Specification

Carrier: Paper/off-white
Adhesive Bond: Permanent
Adhesive Base: Solvent acrylic
Initial Tack: None
Precessing Temperature: 85°C-100° (185°F-212°F)
Release Liner: None
Dwell Time: 30-90 seconds
Application Picture Framing/Photography
Mounting tissue Mounting tissue dry mount tissue
Part # 6121
Mounting tissue that will cover the full SPECTRUM of your mounting needs! This paper based tissue is breathable and removeable. SPECTRUM MOUNT works well with RC coated prints as well as Lithographs and bond paper. With its breathable paper liner, low activating temperature of 165 degrees
F and unique removeability it is a great alternative to Colormount , fotoflat, SR56 as well as MT-5. A quality product at 1/2 the cost of most leading brands.
Part # 6121
Mounting tissue that will cover the full SPECTRUM of your mounting needs! This paper based tissue is breathable and removeable. SPECTRUM MOUNT works well with RC coated prints as well as Lithographs and bond paper. With its breathable paper liner, low activating temperature of 165 degrees
F and unique removeability it is a great alternative to Colormount , fotoflat, SR56 as well as MT-5. A quality product at 1/2 the cost of most leading brands.
Part # 5919
A glassine tissue with a heavy adhesive on both sides. A permanent bonding tissue. No bubbles, no shrinkage of prints.
Recommended for posters, photographs, mounting fabrics, etc. THIS TISSUE IS A GREAT UTILITY TISSUE FOR DRY MOUNTING POSTERS AND PRINTS.

SR-56 is a premium quality, multi-purpose 3.0 mil (75 micron) dry mounting tissue. This permanent, breathable tissue is recommended for bonding resin-coated photographs, posters and printed materials to most smooth surface substrates. The pH-neutral heat-activated adhesive will bond at temperatures as low as 185°F (85°C).

SUGGESTED APPLICATIONS: SR_56 is suitable for use in all makes of dry mounting presses. SR-56 is recommended for bonding RC photographic paper and printed materials to smooth surfaces. It equals or surpasses all dry mounting tissues on the market.
Additional Information
Technical Specification

Carrier: Paper/off-white
Adhesive Bond: Permanent
Adhesive Base: Solvent acrylic
Initial Tack: None
Precessing Temperature: 85°C-100° (185°F-212°F)
Release Liner: None
Dwell Time: 30-90 seconds
Application Picture Framing/Photography
dry mount adhesive rolls dry mount tissue dry mount tissue
Part # 4369
Clear Bond 2000 This is not a tissue, but an adhesive film, pH neutral. Pieces can be overlapped to eliminate waste. Provides a smooth bond on textured papers, canvas, burlap, photos, etc. Melts completely, self trimming. Heat removable Min Temp: 170 Recommended Temp: 190 Comparable to: TM3-Fusion 4000 Advantages: Transparent base reduces show through on dark or colored surfaces. This is United's version of Fusion 4000 at half the price. United Mfrs. your one source for all your picture frame supplies
Part # 5919
A glassine tissue with a heavy adhesive on both sides. A permanent bonding tissue. No bubbles, no shrinkage of prints.
Recommended for posters, photographs, mounting fabrics, etc. THIS TISSUE IS A GREAT UTILITY TISSUE FOR DRY MOUNTING POSTERS AND PRINTS.

SR-56 is a premium quality, multi-purpose 3.0 mil (75 micron) dry mounting tissue. This permanent, breathable tissue is recommended for bonding resin-coated photographs, posters and printed materials to most smooth surface substrates. The pH-neutral heat-activated adhesive will bond at temperatures as low as 185°F (85°C).

SUGGESTED APPLICATIONS: SR_56 is suitable for use in all makes of dry mounting presses. SR-56 is recommended for bonding RC photographic paper and printed materials to smooth surfaces. It equals or surpasses all dry mounting tissues on the market.
Additional Information
Technical Specification

Carrier: Paper/off-white
Adhesive Bond: Permanent
Adhesive Base: Solvent acrylic
Initial Tack: None
Precessing Temperature: 85°C-100° (185°F-212°F)
Release Liner: None
Dwell Time: 30-90 seconds
Application Picture Framing/Photography
Part # 5919
A glassine tissue with a heavy adhesive on both sides. A permanent bonding tissue. No bubbles, no shrinkage of prints.
Recommended for posters, photographs, mounting fabrics, etc. THIS TISSUE IS A GREAT UTILITY TISSUE FOR DRY MOUNTING POSTERS AND PRINTS.

SR-56 is a premium quality, multi-purpose 3.0 mil (75 micron) dry mounting tissue. This permanent, breathable tissue is recommended for bonding resin-coated photographs, posters and printed materials to most smooth surface substrates. The pH-neutral heat-activated adhesive will bond at temperatures as low as 185°F (85°C).

SUGGESTED APPLICATIONS: SR_56 is suitable for use in all makes of dry mounting presses. SR-56 is recommended for bonding RC photographic paper and printed materials to smooth surfaces. It equals or surpasses all dry mounting tissues on the market.
Additional Information
Technical Specification

Carrier: Paper/off-white
Adhesive Bond: Permanent
Adhesive Base: Solvent acrylic
Initial Tack: None
Precessing Temperature: 85°C-100° (185°F-212°F)
Release Liner: None
Dwell Time: 30-90 seconds
Application Picture Framing/Photography
Mounting tissue dry mount tissue dry mount tissue
Part # 6121
Mounting tissue that will cover the full SPECTRUM of your mounting needs! This paper based tissue is breathable and removeable. SPECTRUM MOUNT works well with RC coated prints as well as Lithographs and bond paper. With its breathable paper liner, low activating temperature of 165 degrees
F and unique removeability it is a great alternative to Colormount , fotoflat, SR56 as well as MT-5. A quality product at 1/2 the cost of most leading brands.
Part # 5919
A glassine tissue with a heavy adhesive on both sides. A permanent bonding tissue. No bubbles, no shrinkage of prints.
Recommended for posters, photographs, mounting fabrics, etc. THIS TISSUE IS A GREAT UTILITY TISSUE FOR DRY MOUNTING POSTERS AND PRINTS.

SR-56 is a premium quality, multi-purpose 3.0 mil (75 micron) dry mounting tissue. This permanent, breathable tissue is recommended for bonding resin-coated photographs, posters and printed materials to most smooth surface substrates. The pH-neutral heat-activated adhesive will bond at temperatures as low as 185°F (85°C).

SUGGESTED APPLICATIONS: SR_56 is suitable for use in all makes of dry mounting presses. SR-56 is recommended for bonding RC photographic paper and printed materials to smooth surfaces. It equals or surpasses all dry mounting tissues on the market.
Additional Information
Technical Specification

Carrier: Paper/off-white
Adhesive Bond: Permanent
Adhesive Base: Solvent acrylic
Initial Tack: None
Precessing Temperature: 85°C-100° (185°F-212°F)
Release Liner: None
Dwell Time: 30-90 seconds
Application Picture Framing/Photography
Part # 5919
A glassine tissue with a heavy adhesive on both sides. A permanent bonding tissue. No bubbles, no shrinkage of prints.
Recommended for posters, photographs, mounting fabrics, etc. THIS TISSUE IS A GREAT UTILITY TISSUE FOR DRY MOUNTING POSTERS AND PRINTS.

SR-56 is a premium quality, multi-purpose 3.0 mil (75 micron) dry mounting tissue. This permanent, breathable tissue is recommended for bonding resin-coated photographs, posters and printed materials to most smooth surface substrates. The pH-neutral heat-activated adhesive will bond at temperatures as low as 185°F (85°C).

SUGGESTED APPLICATIONS: SR_56 is suitable for use in all makes of dry mounting presses. SR-56 is recommended for bonding RC photographic paper and printed materials to smooth surfaces. It equals or surpasses all dry mounting tissues on the market.
Additional Information
Technical Specification

Carrier: Paper/off-white
Adhesive Bond: Permanent
Adhesive Base: Solvent acrylic
Initial Tack: None
Precessing Temperature: 85°C-100° (185°F-212°F)
Release Liner: None
Dwell Time: 30-90 seconds
Application Picture Framing/Photography
Mounting tissue dry mount adhesive rolls Mounting tissue
Part # 6121
Mounting tissue that will cover the full SPECTRUM of your mounting needs! This paper based tissue is breathable and removeable. SPECTRUM MOUNT works well with RC coated prints as well as Lithographs and bond paper. With its breathable paper liner, low activating temperature of 165 degrees
F and unique removeability it is a great alternative to Colormount , fotoflat, SR56 as well as MT-5. A quality product at 1/2 the cost of most leading brands.
Part # 4369
Clear Bond 2000 This is not a tissue, but an adhesive film, pH neutral. Pieces can be overlapped to eliminate waste. Provides a smooth bond on textured papers, canvas, burlap, photos, etc. Melts completely, self trimming. Heat removable Min Temp: 170 Recommended Temp: 190 Comparable to: TM3-Fusion 4000 Advantages: Transparent base reduces show through on dark or colored surfaces. This is United's version of Fusion 4000 at half the price. United Mfrs. your one source for all your picture frame supplies
Part # 6121
Mounting tissue that will cover the full SPECTRUM of your mounting needs! This paper based tissue is breathable and removeable. SPECTRUM MOUNT works well with RC coated prints as well as Lithographs and bond paper. With its breathable paper liner, low activating temperature of 165 degrees
F and unique removeability it is a great alternative to Colormount , fotoflat, SR56 as well as MT-5. A quality product at 1/2 the cost of most leading brands.
Mounting tissue dry mount tissue Mounting tissue
Part # 6121
Mounting tissue that will cover the full SPECTRUM of your mounting needs! This paper based tissue is breathable and removeable. SPECTRUM MOUNT works well with RC coated prints as well as Lithographs and bond paper. With its breathable paper liner, low activating temperature of 165 degrees
F and unique removeability it is a great alternative to Colormount , fotoflat, SR56 as well as MT-5. A quality product at 1/2 the cost of most leading brands.
Part # 5919
A glassine tissue with a heavy adhesive on both sides. A permanent bonding tissue. No bubbles, no shrinkage of prints.
Recommended for posters, photographs, mounting fabrics, etc. THIS TISSUE IS A GREAT UTILITY TISSUE FOR DRY MOUNTING POSTERS AND PRINTS.

SR-56 is a premium quality, multi-purpose 3.0 mil (75 micron) dry mounting tissue. This permanent, breathable tissue is recommended for bonding resin-coated photographs, posters and printed materials to most smooth surface substrates. The pH-neutral heat-activated adhesive will bond at temperatures as low as 185°F (85°C).

SUGGESTED APPLICATIONS: SR_56 is suitable for use in all makes of dry mounting presses. SR-56 is recommended for bonding RC photographic paper and printed materials to smooth surfaces. It equals or surpasses all dry mounting tissues on the market.
Additional Information
Technical Specification

Carrier: Paper/off-white
Adhesive Bond: Permanent
Adhesive Base: Solvent acrylic
Initial Tack: None
Precessing Temperature: 85°C-100° (185°F-212°F)
Release Liner: None
Dwell Time: 30-90 seconds
Application Picture Framing/Photography
Part # 6121
Mounting tissue that will cover the full SPECTRUM of your mounting needs! This paper based tissue is breathable and removeable. SPECTRUM MOUNT works well with RC coated prints as well as Lithographs and bond paper. With its breathable paper liner, low activating temperature of 165 degrees
F and unique removeability it is a great alternative to Colormount , fotoflat, SR56 as well as MT-5. A quality product at 1/2 the cost of most leading brands.
Mounting tissue dry mount tissue
Part # 6121
Mounting tissue that will cover the full SPECTRUM of your mounting needs! This paper based tissue is breathable and removeable. SPECTRUM MOUNT works well with RC coated prints as well as Lithographs and bond paper. With its breathable paper liner, low activating temperature of 165 degrees
F and unique removeability it is a great alternative to Colormount , fotoflat, SR56 as well as MT-5. A quality product at 1/2 the cost of most leading brands.
Part # 5919
A glassine tissue with a heavy adhesive on both sides. A permanent bonding tissue. No bubbles, no shrinkage of prints.
Recommended for posters, photographs, mounting fabrics, etc. THIS TISSUE IS A GREAT UTILITY TISSUE FOR DRY MOUNTING POSTERS AND PRINTS.

SR-56 is a premium quality, multi-purpose 3.0 mil (75 micron) dry mounting tissue. This permanent, breathable tissue is recommended for bonding resin-coated photographs, posters and printed materials to most smooth surface substrates. The pH-neutral heat-activated adhesive will bond at temperatures as low as 185°F (85°C).

SUGGESTED APPLICATIONS: SR_56 is suitable for use in all makes of dry mounting presses. SR-56 is recommended for bonding RC photographic paper and printed materials to smooth surfaces. It equals or surpasses all dry mounting tissues on the market.
Additional Information
Technical Specification

Carrier: Paper/off-white
Adhesive Bond: Permanent
Adhesive Base: Solvent acrylic
Initial Tack: None
Precessing Temperature: 85°C-100° (185°F-212°F)
Release Liner: None
Dwell Time: 30-90 seconds
Application Picture Framing/Photography